Pinball LED lamp 6,3 Volt BA9s PLUS

Flicker-free Flipper-LED PLUS with large beam angle. Optimized to 6.3 volts with BA9's bayonet socket (GE44, # 44).

They do not flicker. There is no noticable strobe-effect as known from pinball LEDs.
Energy saving Require only about 1/10 of the energy in comparison to traditional light bulbs. This not only protects the power supply, but also the connectors and cables. Charred power connectors and boards are a thing of the past.
LEDs have a very long life. Shocks cannot harm the LEDs.
Very low heat generation. Inserts and backglasses are preserved.
Older LEDs often had a clear, unnatural green tint. Intense cold white hue. No blue tint - the white is bright and radiant.
Polarity protected. The polarity of  this Led cannot be mixed up. Unlike traditional pinball LEDs, they always light up – regardless of how the socket is wired. This is a huge advantage, especially when using a bayonet socket. Up until now, the cables on the socket often had to be resoldered.

PLUS features:
A capacitor smoothes the voltage on the LED.
Flicker free for the highest demands!
No phantom lights on flippers of the latest generation.
Fading "soft" switching on and off. The LED PLUS switches slightly delayed, similar to a light bulb.
For early electronics pinball
Featured LED PLUS also work in the so-called EE flippers (EE = Early Electronic).

Technical specifications:
Light bulb type LED lamp PLUS 
Color red, blue, yellow, orange, green, pink, warm white, cool white
Lamp socket-BA9s
Rated voltage 6.3 volts
Length: 23 mm