Ribbon cable 10 conductor with 2x5 connector for RM5X20

Ribbon cable V20 serially with isolated coin meter line. This cable is replaced necessarily if a common coin validator (parallel coin exit ) by an RMX20. 10 conductors ribbon cable AWG 28, rasters 1.27 with 2x5 pin female connector with strain relief at both ends, contacts gilds DIN41 651, raster 2,54

Operational area:
All devices which have none or not sufficient bonus attitude build in. Replace the common coin validator (parallel output) with a RmX20. So that the credit exit of the RM5X20 does not enumerate additional credit, you need this cable.
For example:
Novomatic Darts, you can determine then the credit bonus attitude freely over the RM5X20 coin validator

Technical data:
Length aprox. 16 cm